User manual X10 IR543

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual X10 IR543. We hope that this X10 IR543 user guide will be useful to you.


X10 IR543 : Download the complete user guide (7 Ko)

Manual abstract: user guide X10 IR543

Detailed instructions for use are in the User's Guide.

[. . . ] Command Center, Model IR543 Setup and Operating Instructions The IR543 Command Center sends commands over your existing house wiring to control lights and appliances around your home. The Command Center also works with many X10 Universal Remote Controls so you can use the same remote that controls your TV, VCR, etc. , to control your lights and appliances. [. . . ] Press the corresponding number button(s) for the X10 Module(s) you want to control. To brighten or dim lights connected to X10 Lamp Modules and Wall Switch Modules (sold separately), first press the corresponding number button(s), then press and hold the Bright or Dim button until the desired brightness level is reached. Press the All Lights On to turn on ALL lights connected to Lamp Modules and Wall Switch Modules (set to the same Housecode as the Command Center). Press the All Units Off to turn off ALL X10 Modules (set to the same Housecode as the Command Center) including Appliance Modules. Note, All Lights On and All Units Off affect all 16 Unit Codes (not just 1 to 4 or 5 to 8). You can control Modules in groups by pressing 1, 2, 3, and 4 (or 5, 6, 7, and 8), followed by On, Off, Bright, or Dim. Modules set to 1, 2, 3, and 4 (or 5, 6, 7, and 8) will then turn on and off, or brighten and dim at the same time (as a group). To control Modules from an X10 Universal Remote: Follow the setup procedure in the owner's manual for the Universal Remote to set it up to work with the IR543 Command Center. Troubleshooting If X10 Modules don't respond to theCommand Center: · Check the Housecode on the Command Center is set to the same Housecode as your Modules. · Check the position of the 1-4/5-8 switch on the Command Center. If some modules work but others don't: · Try plugging the Module or the Command Center into a different outlet. [. . . ] If service is required under this warranty: Call 1-800-442-5065, visit www. x10. com, or e-mail support@x10. com. For help or more information on setup, please visit: http://www. x10. com/support IR543-1/03 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE X10 IR543




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual X10 IR543 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.