User manual X10 LW10E DATASHEET

[. . . ] Wall-Mounted Dimmer 230VAC - 50 Hz 500W LOAD RATING Key Features · Works with most 12V low voltage halogen transformers · Replaces any normal dimmer for X10 control of branch lighting circuit rated betwen 60W and 500W. [. . . ] The wallmounted dimmer simply replaces the normal dimmer and is mounted into a flush box. It can also be controlled by external momentary action switches connected to the terminal 2. The LW10E responds to STANDARD X10 protocol: "All lights on", "All lights off"and "All units off" from any X10 controller set to its house code, regardless of unit code. Or alternatively, by individual unit controller using "On", "Off", "Bright" and "Dim". Combined with the memory dim feature, the LW10 can change the room lighting instantly or progressively. The unit is currently supplied with cover plate Jung CD 500 and mounting frame. Technical data · Supply voltage: 230V +10% -15% 50 Hz · Supply current : <20 mA capacitive · Making capacity: 60 to 500W (incandescent lamps only) · Regulating time: 3, 7 sec ±0, 2sec from fully on to off · EMC emission: according to EN 50081-1 · EMC immunity: according to EN 50082-1 · Electrical safety: according to EN 60950 and EN 60065 · Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz · Input impedance: > 60 Ohms (L - N) at 120 kHz · Fuse: 2, 5 A (F) · Connections: screw type terminals for phase, neutral, switched phase. [. . . ] The ideal light level can be pre-programmed in your controller or X10 CM11E. [. . . ]