User manual X10 PH508

[. . . ] POWERHORNTM Remote Siren, Model PH508 INSTALLATION AND OPERATING INSTRUCTIONS 1. [. . . ] WARNING: Set the Housecode to the same letter as your X10 Controllers and/ or Security System. A· O· C · · 15 · · 1· 3 5 · M · E · 13 11 · ·9· Set the Unit Code to any unused number (set to 13 if you have a DC8700 Security System). K I· G · 7 PowerhornTM X10 Wireless Technology, Inc. To avoid permanent hearing damage, do not stand too close to it when you trip the alarm. To trip the POWERHORN from any X10 controller (if you hear a strange noise at night, for example): Press Unit Code-ON, then Unit Code-OFF, then Unit Code-ON, repeatedly. The POWERHORN will sound for as long as you keep pressing ON and OFF and will stop a few seconds after you stop pressing buttons. The POWERHORN will sound for as long as you keep pressing All Lights On, followed by All Units Off and will stop a few seconds after you stop pressing buttons. * Note: If you have a DC8700 security system it might be set to flash lights set to Unit Code 13. If that is the case set the POWERHORN to Unit Code 13. X10. com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. [. . . ] For help or more information on setup, please visit: http://www. x10. com/support PH508-04/03 [. . . ]