User manual YAESU FT-480R
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAESU FT-480R. We hope that this YAESU FT-480R user guide will be useful to you.
Manual abstract: user guide YAESU FT-480R
Detailed instructions for use are in the User's Guide.
[. . . ] 39 MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 ABOUT COAXIAL CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 GROUNDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
SETUP FOR STRAIGHT KEY (AND STRAIGHT KEY EMULATION) OPERATION . . . . . [. . . ] Rotate the [DSP/SEL] knob to select the menu item "CWSTONE". While pressing and holding the [METER/DIM] button, rotate the [DSP/SEL] knob to set the desired sidetone volume level (FIX 0 - FIX 100). If you wish to adjust the CW sidetone level with the [AF GAIN] knob, press the [F] key to change the display to "LNK-xx" then rotate the [DSP/SEL] knob to set the volume ratio of the CW sidetone volume level for the receiving audio volume level. When the LNK 0 is selected, the CW sidetone volume level becomes the same as receiving audio volume level. (You may press the [HOME/RCL] button to reset the CW sidetone level to the factory default. ) 5. Press and hold the [F] button for one second to save the new setting and return to normal operation.
[HOME/RCL] button
[DSP/SEL] knob
[F] button [METER/DIM] button
Page 48
FT-480R OPERATION MANUAL
CW MODE OPERATION
CW PITCH ADJUSTMENT
You may adjust the center frequency of the receiver passband, as well as the pitch of your offset CW carrier via the Menu Item "CWPITCH". Rotate the [DSP/SEL] knob to select the menu item "CWPITCH". While pressing and holding the [METER/DIM] button, rotate the [DSP/SEL] knob to set the desired pitch frequency. (You may press the [HOME/RCL] button to reset the pitch frequency to the factory default. ) 5. Press and hold the [F] button for one second to save the new setting and return to normal operation.
[HOME/RCL] button
[DSP/SEL] knob
[F] button [METER/DIM] button
CW TRAINING FEATURE
The FT-480R provides a unique CW Training feature, which sends random Morse Code five-character groups via the sidetone (heard in the speaker), so you can improve your CW proficiency whether or not the bands are open. Rotate the [DSP/SEL] knob to select the menu item "CWTRAIN". Rotate the [DSP/SEL] knob to select "ON" to expand the menu item. Press and hold the [F] button for one second to save the new setting and return to normal operation. Press and hold the [F] button for one second to enter the Menu mode again. Rotate the [DSP/SEL] knob to select the menu item "BCN TIM". Rotate the [DSP/SEL] knob to select the interval time (between message and message) Available selections are 1 - 255 second or off. Press and hold the [F] button for one second to save the new setting and return to normal operation.
Page 50
FT-480R OPERATION MANUAL
CW MODE OPERATION
BEACON FEATURE
BEACON TRANSMISSION (ON THE AIR)
1. Press and hold the [F] button for one second to save the new setting and return to normal operation. Press the [VOICE/C. S] button to activate the Beacon Feature (transmit the CW Beacon). The "PLAY1" notation appears on the display while sending the beacon, and the "BEACON" notation appears on the display between transmissions. To disable the transmission from the Beacon, press the [VOICE/C. S] button again.
[VOICE/C. S] button
[DSP/SEL] knob
[F] button
MANUAL BEACON TRANSMISSION
You may also send the Beacon text manually. If this is done, all three "Beacon" messages may be used as a traditional CW message keyer. [. . . ] Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1pc Handle end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2pcs
Installation
Screw the Carrying Handle to the FT-480R using the supplied screws. Do not install the supplied MHG-1 Mounting Screws if you are not installing the MHG-1! [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAESU FT-480R
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAESU FT-480R will begin.