User manual YAESU VX-3E

[. . . ] 2 Keypad Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Accessories & Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation of Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you initiate scanning on a channel that does not have the blinking " " icon appended, you will scan all channels including those with the blinking " " icon appended. Here is the procedure for setting up and using the Preferential Scan List: 1. Recall the Memory Channel, which you wish to add to the Preferential Scan List. Press and hold in the [TXPO] key for one second to enter the Set mode. Press the [TXPO] key momentarily to enable adjustment of this Set Mode Item. When you have made your selection, press the PTT switch to save the settings and exit to normal operation. Press the [V/M] key momentarily to enter the Memory Recall mode, if you are not using memories already. Rotate the DIAL to select any channel which has a blinking " " icon appended to the channel number. Press and hold in the [BAND] key for one second, and rotate the DIAL knob while holding in the [BAND] key, to select the desired Memory Scan mo2de. TAG1: TAG1 The scanner sweeps only those Memory channels with the same first digit of the alpha/numeric tag as the first channel on which scanning started. TAG2: TAG2 The scanner sweeps only those Memory channels with the same first and second digits of the alpha/numeric tag as the first channel on which scanning started. Press the [V/M] key momentarily to enter the Memory Recall mode, if you are not using memories already. Press and hold in the [F/W] key for one second, then rotate DIAL knob to select the memory channel you wish to be the "Priority" channel. The "PRI" icon will appear above of the volume level indicator, indicating it is the Priority channel. Now set the VX-3Efor operation on another memory channel, or on a VFO frequency. However, the "DW" icon will appear on the display, and every five seconds the VX-3Ewill check the Priority Channel for activity. If a station appears on the Priority Channel, the radio will pause on that channel, as described previously. The receiving time interval (ratio) between the current channel (or VFO frequency) and Priority channel may be customized via Set Mote Item 65: PRI. TMR PRI. TMR. Press and hold in the [TXPO] key for one second to enter the Set mode. Press the [TXPO] key momentarily to enable adjustment of this Set Mode Item. Available selections are 0. 1S - 0. 5S (0. 5S/step) and 1. 0S - 10S (0. 5S/ step). When you have made your selection, press the PTT switch to save the new setting and exit to normal operation. [. . . ] Press the [MODE] key to toggle the measurement units between "°F" and "°C". 122 VX-3EOPERATING MANUAL SET (MENU) MODE Set Mode Item 86 [TN FRQ] Function: Setting of the CTCSS Tone Frequency. Available Values: 50 standard CTCSS tones Default: 100. 0 Hz CTCSS TONE FREQUENCY (Hz) 67. 0 82. 5 100. 0 123. 0 69. 3 85. 4 103. 5 127. 3 71. 9 88. 5 107. 2 131. 8 74. 4 91. 5 110. 9 136. 5 77. 0 94. 8 114. 8 141. 3 79. 7 97. 4 118. 8 146. 2 Set Mode Item 87 [TOT] 151. 4 156. 7 159. 8 162. 2 165. 5 167. 9 171. 3 173. 8 177. 3 179. 9 183. 5 186. 2 Function: Setting of the TOT time Available Values: OFF/0. 5M - 10. 0M (0. 5M/ 189. 9 192. 8 196. 6 199. 5 203. 5 206. 5 210. 7 218. 1 225. 7 229. 1 233. 6 241. 8 step) 250. 3 254. 1 ­ ­ ­ ­ Default: 3. 0M (3 minutes) The time-out timer shuts off the transmitter after continuous transmission of the programmed time. Set Mode Item 88 [TS MUT] Function: Enables/Disables the receiver audio output while the Tone Search Scanner is activated. Available Values: ON/OFF Default: ON Set Mode Item 89 [TS SPD] Function: Selects the Tone Search Scanner speed. [. . . ]