Detailed instructions for use are in the User's Guide.
[. . . ] IMPORTANT
Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] The default backup mode is "OFF".
· Left Pedal Mode · Sustain Sample Depth (CLP-950)
CLP-950/930
36
Connecting to a Personal Computer
Although the Clavinova can be connected to a personal computer via the MIDI IN/OUT connectors and a MIDI interface, the TO HOST connector and HOST SELECT switch allow direct connection to Apple Macintosh or IBM-PC/AT personal computers for sequencing and other music applications without the need for a separate MIDI interface.
"The Clavinova-Computer Connection" is a supplementary guidebook that describes, for beginners, what you can do with your Clavinova and a personal computer and how to set up a Clavinova-Computer system (the manual is not written for any specific models). The document is available as a PDF file (in English) at the following Internet address: Clavinova Home Page: http://www. yamaha. co. jp/english/product/cl/ Yamaha Manual Library (Electronic Musical Instruments) http://www2. yamaha. co. jp/manual/english/
NOTE
· When connecting the Clavinova to a personal computer, first turn the power to both the Clavinova and the computer OFF before connecting the cable and setting the HOST SELECT switch. After connecting the cable and making the appropriate HOST SELECT switch setting, turn the power to the computer on first, then turn on the Clavinova. · When not using the [TO HOST] terminal of the Clavinova, make sure the cable is disconnected from the [TO HOST] terminal. If the cable is left connected, the Clavinova may not function properly. · " HS(" will appear in the display if the host computer is not turned on, the connecting cable is not properly connected, the HOST SELECT switch is not in the proper position, or the MIDI driver or MIDI application is not active. In this case, turn the power off on both the Clavinova and the computer, and check the cable connection and the position of the HOST SELECT switch. Once the connection and HOST SELECT switch position is verified, turn the power of the computer on first, then the Clavinova, to check if the MIDI driver and MIDI application function properly. · When the HOST SELECT switch is set to "Mac", "PC-1", or "PC-2, no data transfer occurs via the MIDI connectors. To use the MIDI connectors for connection via a standard MIDI interface, set the HOST SELECT switch to "MIDI".
Connecting to an Apple Macintosh Series Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Apple Macintosh Series Computer Set to the "Mac" position.
Mac PC-1
MIDI PC-2
TO HOST
HOST SELECT
CLP-930
Connect the TO HOST connector of the Clavinova to the modem or printer port on your Macintosh, depending on which port your MIDI software is using for MIDI data communication, using a standard Macintosh 8-pin system peripheral cable. You may also have to make other MIDI interface settings on the computer side, depending on the type of software you use (refer to your software owner's manual). G "Mac" Cable Connections
MINI DIN 8-PIN
1 2 3 4 5 6 7 8
2 (HSK i) 1 (HSK 0) 5 (RxD-) 4 GND 3 (TxD-) 8 (RxD+) 7 (GP i) 6 (TxD+)
MINI DIN 8-PIN
· 8-pin system peripheral cable. · Data transfer rate: 31, 250 bps.
CLP-950/930
37
Connecting to a Personal Computer
Connecting to an IBM-PC/AT Series Computer . . . . . . . . . . . .
IBM-PC/AT Series Computer Set to the "PC-2" position.
Connect the TO HOST connector of the Clavinova to the RS-232C port on your IBM computer, using a standard 8-pin MINI DIN 9-pin D-SUB cross cable. Refer to your software owner's manual for information on any settings you might have to make on the computer side. G "PC-2" Cable Connections
Mac PC-1
MIDI PC-2
TO HOST
HOST SELECT
CLP-930
MINI DIN 8-PIN
1 2 3 4 8 5
8 (CTS) 7 (RST) 2 (RxD) 5 (GND) 3 (TxD)
D-SUB 9-PIN
· 8-pin mini DIN 9-pin D-SUB cable. · Data transfer rate: 38, 400 bps.
NOTE
· If your system doesn't work properly with the connections and settings listed above, your software may require different settings. · When using the TO HOST terminal to connect to a personal computer using Windows, a Yamaha MIDI driver must be installed in the personal computer. The Yamaha MIDI driver can be obtained at Yamaha's home page on the World Wide Web, <http://www. yamaha. co. jp/english/xg/>.
G Connector Pin Numbers
MINI DIN 8-PIN
678 34 5 12
D-SUB 9-PIN
54321 9876
CLP-950/930
38
Connecting to a Personal Computer
Using a USB Interface (such as the Yamaha UX256)
Connect the USB interface (Yamaha UX256 or equivalent) to your computer using a USB cable. Install the driver software supplied with the interface (or other appropriate driver software) on your computer according to the supplied instructions. Connect your instrument to the USB interface using either a standard Macintosh 8-pin system peripheral cable or MIDI cables. G Connecting the USB Interface and Instrument via a Serial Cable
or
Mac HOST SELECT
PC-1 HOST SELECT
Standard Macintosh 8-pin system peripheral cable
USB cable Mini-DIN 8-pin
UX256 or equivalent Clavinova Computer
G Connecting the USB Interface and Instrument via MIDI Cables
MIDI
OUT IN
MIDI HOST SELECT
USB cable
MIDI cables
UX256 or equivalent Clavinova Computer
CLP-950/930
39
Factory Preset Recall
POWER
All dual mode, split mode, reverb, effect, touch sensitivity, tuning settings, and the settings affected by the Backup Functions can be restored to their original factory preset values by holding the C7 key (rightmost key on the keyboard) while turning the [POWER] switch ON. This also erases all recorder data, and sets all Backup on/off settings (F8: CLP-930, F9: CLP-950) to "OFF".
NOTE
· The factory setting list is found on page 42.
Troubleshooting
If you encounter what appears to be a malfunction, please check the following points before assuming that your Clavinova is faulty. [. . . ] 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311
FRANCE
Yamaha Musique France, Division Claviers BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000
ASIA
HONG KONG
Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688
ITALY
Yamaha Musica Italia S. P. A. , Home Keyboard Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771
U. S. A.
Yamaha Corporation of America, Keyboard Division 6600 Orangethorpe Ave. , Buena Park, Calif. 4, Jakarta 12930, Indonesia Tel: 21-520-2577
SPAIN/PORTUGAL
Yamaha-Hazen Electronica Musical, S. A. 17, 200, 28230 Las Rozas (Madrid) Spain Tel: 91-201-0700
KOREA
Cosmos Corporation 1461-9, Seocho Dong, Seocho Gu, Seoul, Korea Tel: 02-3486-0011
CENTRAL & SOUTH AMERICA
MEXICO
Yamaha de Mexico S. A. [. . . ]