Detailed instructions for use are in the User's Guide.
[. . . ] Digital Percussion
Owner's Manual
EN
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc. , is used, please observe all safety markings and instructions that accompany the accessory product. [. . . ] After a while, the current denominator value appears next to the "CL2" indication.
CL2
2
Set the denominator value of the time signature.
Set the denominator value to one of the values 2 ( ), 4 ( ), 8 ( ), 16 ( ) by using the DIAL.
NOTE
· Default value is 4.
2
4
8
16
3
Press the [FUNCTION] button to exit from the Function mode.
Setting the click volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sets the click volume (range: 1127).
1
Enter the click volume setting function.
Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the "CL3" item appears. After a while current click volume will appear next to the "CL3" indication.
CL3
2
Set the click volume by using the dial.
1
2
126
127
3
Press the [FUNCTION] button to exit from the Function mode.
20
DD-65/YDD-60 Owner's Manual
Play the Pads/Pedals
Setting Equalization On/Off
When you use the internal speakers, set Equalization to ON (default setting is on). When you use headphones or external speakers, set this to off.
1
Enter the Equalization setting function.
Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the "Eq" item appears. After a while, the current On/Off setting will appear next to the "Eq" indication.
Eq
2
Set the Equalizer On/Off.
Turn the DIAL clockwise to set to ON, and turn it counter-clockwise to set it to OFF.
OFF
On
3
Press the [FUNCTION] button to exit from the Function mode.
DD-65/YDD-60 Owner's Manual
21
Playing a Song
This instrument features 100 different songs (five demo songs, as well as Rhythm patterns and Fill-in patterns) that can be used to provide accompaniment. (See the "Song List" on page 40. ) U01U05 can also be used to playback songs you've recorded yourself and/or loaded from computer. Refer to the section "Transferring Song files to and from a connected computer" on page 34 for details. Select one of the songs and listen to it.
Selecting and playing a Song 1
Press the [SONG] button.
When you press the [SONG] button, the current song number appears in the display.
010
2
Select a Song Number.
Use the DIAL to select a song number. Song numbers will increase as the DIAL is turned to the right (clockwise), and decrease as the DIAL is turned to the left (counter-clockwise). (See the "Song List" on page 40. )
NOTE
· Song number " 001" is automatically selected whenever the power is turned ON. · With the Auto Kit Select feature turned on, selecting a song will also automatically select the best suited Drum Kit for that song. (See "Setting the Auto Kit Select ON/OFF" on page 24. ) · The complexity of each song can be shown at the Song list. (See the "Song List" on page 40. )
001
002
100
U01
U05
U01U05 are User Songs which you've recorded yourself and/or loaded from computer. Note that when you press [START/STOP] button, no sounds are played if there is no data.
3
Press the [START/STOP] button.
When you press the [START/STOP] button, a one- or two-measure count-in plays, and the song starts playing. As the song is playing, the Song's current measure will be shown in the display. To stop playback of the song, press the [START/STOP] button once again.
NOTE
· You can also use the TAP START function to start songs (see page 23).
22
DD-65/YDD-60 Owner's Manual
Playing a Song
Tap Start
The Tap Start function allows you to set the song's overall tempo as well as start the accompaniment--simply by tapping out the rhythm. The accompaniment will playback at the tempo with which the pads are struck or the pedals are pressed.
1
Press the [BREAK/TAP] button.
While song playback is stopped, press the [BREAK/TAP] button. All three of the beat lamps flash, indicating the instrument is set to Tap Start standby. To cancel the Tap Start mode, simply press the [BREAK/TAP] button once again (the beat lamps will turn off).
010
12 3 4
2
Play the Tap Start.
In the case of a song in 4/4, strike any pad or press any pedal four times, and the accompaniment will start at the desired tempo.
NOTE
· The number of times needed to strike the pad will change according to the following time signatures; 5/4, 5 times; 4/4, 4 times; 3/4, 3 times; 6/8, 2 times.
3
Stop the Song Playback.
Press the [START/STOP] button and the song accompaniment will stop.
Pad Start
The Pad Start function allows to start the song simply by striking a pad or pressing a pedal. To stop the song, press the [START/STOP] button.
1
Enter the Pad Start setting function.
Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the "PdS" item appears. After a while, the current On/Off status appears next to the "PdS" indication.
PdS
2
Turn Pad Start On/Off.
Turn the DIAL clockwise to set to ON, and turn it counter-clockwise to set it to OFF.
NOTE
· Default setting is OFF.
OFF
On
3
Press the [FUNCTION] button to exit from the Function mode.
DD-65/YDD-60 Owner's Manual
23
Playing a Song
Setting the Auto Kit Select ON/OFF
With the Auto Kit Select feature turned on, the best suited Drum Kit for the song will automatically be selected. If Auto Kit Select is OFF, the Drum kit does not change even if the song number is changed.
1
Enter the Auto Kit Select function.
Press the [FUNCTION] button once, then press the [DRUM 1] or [DRUM 2] button a number of times until the "AtS" item appears. After a while, the current On/Off status will appear next to the "AtS" indication.
AtS
2
Turn Auto Kit Select On/Off.
Turn the DIAL clockwise to set to ON, and turn it counter-clockwise to set it to OFF.
On
OFF On
NOTE
· Default setting is ON.
Auto Kit Select on
3
Press the [FUNCTION] button to exit from the Function mode.
NOTE
· Original factory setting is on.
24
DD-65/YDD-60 Owner's Manual
Playing a Song
Adjusting the Tempo
The song tempo and Click tempo can be set anywhere from 11 to 320 beats per minute. [. . . ] Tel: 714-522-9011
FRANCE
Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000
HONG KONG
Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688
ITALY
Yamaha Musica Italia S. P. A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771
INDONESIA
PT. 4, Jakarta 12930, Indonesia Tel: 21-520-2577
CENTRAL & SOUTH AMERICA
MEXICO
Yamaha de México S. A. [. . . ]