User manual YAMAHA DSP-E390
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA DSP-E390. We hope that this YAMAHA DSP-E390 user guide will be useful to you.
Manual abstract: user guide YAMAHA DSP-E390
Detailed instructions for use are in the User's Guide.
[. . . ] DSP-E390
Natural Sound Digital Sound Field Processor 4 Programs for Digital Sound Field Processing 2 Programs for Dolby Surround (DOLBY PRO LOGIC and ENHANCED) 60W (8) RMS Output Power, 0. 1% THD, 1 kHz (Center Channel Power Amplifier) 15W + 15W (8) RMS Output Power, 0. 7% THD, 1 kHz (Rear Channel Power Amplifier) Automatic Input Balance Control for Dolby Surround Test Tone Generator for Easier Speaker Balance Adjustment 3 Center Channel Modes (NORMAL/WIDE/PHANTOM) Remote Control Capability
Thank you for selecting this YAMAHA digital sound field processor.
OWNER'S MANUAL
CAUTION
RISK OF ELECTRIC SHOCK
CONTENTS
Safety Instructions . . . . . . . . . . . . . . . . . . . 4 Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Speaker Balance Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT! [. . . ] With some subwoofers, including the Yamaha Active Servo Processing Subwoofer System, the amplifier and subwoofer are in the same unit.
REAR OUTPUT terminals
These terminals are for rear channel line output. There is no connection to these terminals when you use the built-in amplifier. However, if you drive rear speakers with an external stereo power amplifier, connect the input terminals of the external amplifier (MAIN IN or AUX terminals of a power amplifier or an integrated amplifier) to these terminals.
CENTER OUTPUT terminal
This terminal is for center channel line output. There is no connection to this terminal when you use the built-in amplifier. However, if you drive a center speaker with an external power amplifier, connect the input terminal of the external amplifier to this terminal.
OUTPUT
LOW PASS fc:200Hz
CENTER OUT REAR OUT
Subwoofer system
FRONT LEVEL switch Normally set to "0 dB". If desired, you can decrease the output level at the FRONT OUT terminals by 10 dB by setting this switch to "10 dB". (Refer to "Notes" on page 11. )
-l0dB 0 dB
FRONT LEVEL
8
IDENTIFICATION OF CONTROLS
FRONT PANEL
NATURAL SOUND DIGITAL SOUND FIELD PROCESSOR DSPE390
l
DIGITAL SOUND FIELD PROCESSOR
TEST CENTER MODE PROGRAM EFFECT TAPE MONITOR
POWER
DELAY
PRO LOGIC ENHANCED WIDE
ms
VOLUME l8 20 24 28 34 CENTER LEVEL REAR LEVEL 40 50 l6 l4 l2 l0 8 6 4 3 2 70 0 I0 0 I0 dB 0 l
CINEMA DSP
60
1
2
3 4 5 6 78
90
A
REMOTE CONTROL TRANSMITTER 1
TAPE MONITOR
0
2 3 4
POWER Turns the power on/off. Display panel Displays your selection on the DSP or other information. Remote control sensor Receives signals from the remote control transmitter. (See pages 1011. ) CENTER LEVEL Adjusts center speaker sound output level. (See page 10. ) PROGRAM Selects a program from the digital sound field processor. (See pages 1214. )
8 9 0
REAR LEVEL Adjusts rear speaker sound output level. (See page 14. ) EFFECT ON/OFF Switches on/off the digital sound field processor. (See page 14. ) TAPE MONITOR Used when the tape deck is connected to this unit's TAPE terminals to select that tape as the input source. HALL
CNCT VIDEO MONO MOVIE
ROCK
ON/OFF EFFECT TEST CENTER MODE
9 6 A
DELAY TIME
MASTER VOLUME
+
+
5 6 7
A B
9
SPEAKER BALANCE ADJUSTMENT
This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. When this adjustment is performed, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor.
2
53
1
PROGRAM
4 6
PRO LOGIC -- ENHANCED SUR. HALL
CNCT VIDEO MONO MOVIE
ROCK
ON/OFF EFFECT TEST CENTER MODE
DELAY TIME
MASTER VOLUME
3 5
+
+
64 1 5
Select the center channel output mode according to your speaker configuration. (Refer to "SPEAKER CONFIGURATION" on page 5. )
CENTER MODE
NORMAL WIDE PHANTOM
Set to the " " position.
2
Turn on the power of this unit and the amplifier etc.
POWER
On the feature of each mode, refer to the "Notes" shown below.
6
TEST
NORMAL WIDE PHANTOM
3
ms
TEST
Turn the DSP on, so that a DSP program name appears on the display.
EFFECT
Flashes continuously.
CONCERT HALL
4
Select the PRO LOGIC or PRO LOGIC ENHANCED mode, so that the corresponding name is illuminated on the display.
Notes q In step 5, when you select the center channel output mode, note the following. For 5 speaker configuration) NORMAL: Select this mode when you use a center speaker that is smaller than the front speakers. WIDE: Select this mode when you use the center speaker approximately same sized as the front speakers. For 4 speaker configuration) PHANTOM: Select this mode when you do not use the center speaker. [. . . ] In this case, reposition the main unit to avoid direct lighting.
15
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help.
SYMPTOM The unit fails to turn on when the POWER switch is pressed. The protection circuit has been activated because of short circuit etc. The power to the component connected to the REC OUT terminals of this unit is off. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA DSP-E390
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA DSP-E390 will begin.