Detailed instructions for use are in the User's Guide.
[. . . ] · The screen displays as illustrated in this Owner's Manual are for instructional purposes, and may appear somewhat different from the screens which appear on your device. · Apple, Mac and Macintosh, iPhone, iPad, iTunes are trademarks of Apple Inc. , registered in the U. S. · The company names and product names in this Owner's Manual are the trademarks or registered trademarks of their respective companies.
© 2011 Yamaha Corporation. All rights reserved.
TNR-i Quick Guide
1
Introduction
Introduction
TNR-i is an iPhone/iPad application developed by Yamaha based on its popular TENORI-ON hardware product. [. . . ] If you touch the lowest LED button in a column the note will sound once without any repeats.
Pitch
If you turn the Quantize function ON, note timing in the Solo Mode will be synchronized to the Score Mode, making it easy to play solos with rhythm matching that of a background playing in the Score Mode layers. Refer to "Quantize" in the TENORI-ON Manual.
TNR-i Quick Guide
13
Using Blocks
Using Blocks
Some Ideas for Using Blocks
You can leave the current composition in memory while copying it to other blocks where it can be edited to create variations that you can switch between at any time. You could also create totally different compositions in different blocks, and then switch between them in real time for interesting, varied performances.
Switching Between Blocks
You can switch between blocks simply by holding the [R5] function button and tapping an LED button in the column corresponding to the block you want to switch to.
Block 01
16
Holding the [R5] button
Blocks
01
02
03
04
15
16
TNR-i Quick Guide
14
Using Blocks
Copying from Block to Block
You can copy either a single layer to a different block, or all layers from the current block to another block.
· Copying via the LED Buttons 1. The currently playing block will be displayed.
To Copy a Single Layer:
While still holding the [R5] button, tap the lowest LED button in the lit column (the LEDs in the column will shine brighter), and then tap an LED button in the column corresponding to the block you want to copy to. The current layer from the source block will be copied to the same layer in the destination block.
To Copy All Layers:
While still holding the [R5] button, tap the lowest LED button in the lit column twice (the LEDs in the column will shine brighter each time the button is tapped), and then touch an LED button in the column corresponding to the block you want to copy to. All layers from the source block will be copied to the destination block.
Tap the lowest LED button in the lit column Only the selected layer is copied. Double-tap the lowest LED button in the lit column All layers are copied (the entire block).
Holding the [R5] button
Holding the [R5] button
Tap an LED button in the column corresponding to the block you want to copy to.
TNR-i Quick Guide
15
Using the Menu
Using the Menu
About the Menu
In addition to the wide range of control available via the function and LED buttons, a number of detailed settings can be made via the TNR-i menu, including tempo, clock display, file save/load and many more.
Basic Menu Operation
1. Tap the desired menu item to call up the corresponding menu.
From the Menu display, you can execute the desired function or edit the desired parameter value. To exit from the Menu display, tap [Done] or any section outside the menu area.
TNR-i Quick Guide
16
Menu List
Menu List
Regarding menu items marked with an asterisk (*), refer to the TENORI-ON Manual PDF at the following URL. http://www. global. yamaha. com/tenori-on/downloads/
Play Menu
Parameters that apply to all layers and blocks.
Master Tempo* Master Scale*
Sets the master tempo. Sets the master scale.
The "Major Pentatonic" and "User" scales are provided in the TNR-i, in addition to the scales of the hardware TENORI-ON.
Master Transpose* Master Loop Speed* Master Loop Point* Reset Loop Timing Mute Swing Rate
Sets the transposition. If the mail receiver has already installed the TNR-i to his/her iPhone/iPad, the received file can be played immediately on his/her iPhone/iPad by tapping [Click Here!]. When the received file is opened from some other E-mail software, the file will be saved to the TNR-i folder with the name "IMPORTED. " If a file of the same name already exists, the file will be overwritten. Because of this, you should always change the names of received files from "ImportedFile. "
Delete
Tap [>] at the right of the file name to call up the new menu. Tapping the area outside the [Delete] button cancels the [Delete] indication. Tap [+] at the right of the navigation bar to call up the display for entering the file name. From this display, tap the file name to call up the on-screen keyboard, then enter the desired name. After entering the file name, tap [Save] to execute the Save operation. If you've entered an already existing file name and an error dialog appears, enter a different file name then tap [Save] again. Tapping the [+] with the selected Song file will call up the "Recording Menu. " During saving, no other operations, including Save Cancel, can be executed.
Save
TNR-i Quick Guide
20
Menu List
Effect Menu
Reverb and chorus effect settings.
Reverb Type* Reverb Param* Chorus Type* Chorus Param*
Sets the reverb effect type. Sets the chorus effect depth.
Interior Menu
Settings not related to performance (clock, song playback).
Interior Start
Begins operation of the specified Interior mode.
Tap [Start] in the Menu to immediately begin the operation specified at the "Interior Type" described below. The Menu is not available in the Interior mode.
Interior Type
Selects the type of Interior mode operation.
Range · Song(DEMO) . . . . . . . . . . . . . . . . . . [. . . ] When you remove the player: Tap [Remove Player].
Selecting another player and starting the Multiplayer Game
There are two ways to select another player.
1. Selecting another player with "Auto-Match. "
When the Multiplayer Game window is called up, "Auto-Match By Game Center" is shown as the player name. In this status, tapping [Play Now] will start the search to find a player who wants to join the session.
The Game Center will determine the player who has also executed "Auto-Match. " Note that you should wait until the Game Center determines the player. Selecting another player with "Invite Friends. "
Ask your friends to set the "Allow Game Invites" (called up via [Game Center] > Account > [View Account] > [Allow Game Invites]) of his/her account to on. [. . . ]