User manual YAMAHA VENTURE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA VENTURE. We hope that this YAMAHA VENTURE user guide will be useful to you.
Manual abstract: user guide YAMAHA VENTURE
Detailed instructions for use are in the User's Guide.
[. . . ] OWNER'S MANUAL
PZ50RTX PZ50GTX PZ50MTX PZ50VTX
LIT-12628-02-68
8GK-28199-11
ESU10040
Introduction
ESU10120
Congratulations on your purchase of a Yamaha snowmobile. This model is the result of Yamaha's vast experience in the production of fine sporting and touring snowmobiles. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will give you an understanding of the operation, inspection, and basic maintenance of this snowmobile. [. . . ] Projection on the air filter case cover
To close the shroud and install the front cover and air filter case cover 1. Insert the projections on the end of the air filter case cover into the slots in the air filter case, place it in the original position, and then tighten the fasteners.
Slowly lower the shroud to the original position, and then hook the shroud latches (PZ50VT).
Left side cover
To remove the left side cover Loosen the fasteners, and then remove the left side cover.
1. Slot in the air filter case
2.
Fit the holders on the front cover over the projections on the air filter case cover, slide the front cover downward, and then hook the latch onto the holder on the front of the snowmobile (PZ50RT / PZ50GT / PZ50MT).
1. Left side cover
To install the left side cover Place the left side cover in the original position, and then tighten the fasteners.
Right side cover
To remove the right side cover Loosen the quick fastener screws, and then remove the right side cover.
46
Periodic maintenance
2. Quick fastener screw
To install the right side cover Place the right side cover in the original position, and then tighten the quick fastener screws.
1. Right upper cover
Top cover (PZ50RT / PZ50GT / PZ50MT)
To remove the top cover Pull up on the rear of the top cover.
To install the right upper cover 1. Place the right upper cover in the original position, and then install and tighten the bolts to the specified torque. Right upper cover bolt tightening torque: 8 Nm (0. 8 m·kgf, 5. 8 ft·lb) 2. Install the top cover.
Left and right upper covers (PZ50VT)
To remove an upper cover 1. Top cover
To install the top cover Insert the projections on the front of the top cover into the slots in the left and right upper covers, and then fit the projections on the rear of the top cover into the grommets.
Right upper cover (PZ50RT / PZ50GT / PZ50MT)
To remove the right upper cover 1. Right upper cover
47
Periodic maintenance
To install an upper cover 1. Insert the projections on the upper cover into the slots, fit the holders on the cover onto the grommets, and then tighten the fasteners.
EWS00090
WARNING
G
G
G
Do not drive the snowmobile with the shroud or covers unfastened or removed. Keep your body and clothing away from rotating parts when servicing the snowmobile with the shroud or covers removed. Do not touch the hot muffler and engine during or immediately after operation.
ECS00370
CAUTION:
1. Holder
Make sure that all cables, leads, etc. , are routed properly before installing the shroud and covers.
NOTE:
When installing the covers, be sure to tighten all fasteners securely.
ESU11780
Checking the spark plugs
The spark plug is an important engine component and is easy to inspect. The condition of the spark plug can indicate the condition of the engine. Check the coloration on the white porcelain insulator around the center electrode. The ideal coloration at this point is a medium to a light tan color for a snowmobile that is being ridden normally. If a spark plug shows a distinctly different color, there could be something wrong with the engine. For example, a very white center electrode porcelain color could indicate an intake track air leak or carburetion problem for that cylinder. Instead, take the snowmobile to a Yamaha dealer for inspection and possible repairs.
1. Slot
2.
Close the shroud.
48
Periodic maintenance
You should periodically remove and inspect the spark plug because heat and deposits will cause a spark plug to slowly break down and erode. [. . . ] If the dealer is not able to do so, he is expected to contact Yamaha Motor Corporation, U. S. A. , for clarification or assistance.
When contacting Yamaha Motor Corporation, U. S. A. be sure to include the model, serial number, names, dates, and receipts.
CHANGE OF ADDRESS
The federal government requires each manufacturer of a motor vehicle to maintain a complete, up-to-date list of all first purchasers against the possibility of a safety-related defect and recall. This list is compiled from the purchase registrations sent to Yamaha Motor Corporation, U. S. A. If you should move after you have purchased your new snowmobile, please advise us of your new address by sending a postcard listing your snowmobile model name, engine serial number, dealer number (or dealer's name) as it is shown on your warranty registration identification, your name and new mailing address. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA VENTURE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA VENTURE will begin.