User manual ZANUSSI ZRME38FW1

[. . . ] WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged. [. . . ] Install the two plastic distance guides (the parts on the black vanes -condenser- at the rear) by turning it 90° (as shown in the figure) to prevent the condenser from touching the wall. The distance between the appliance and back wall must be a maximum of 75 mm. When using your fridge for the first time, or after transportation, keep it in an upright position for at least 3 hours before plugging into the mains. This allows efficient operation and prevents damage to the compressor. This is normal and the smell will fade away when your fridge starts to cool. No-frost refrigerators differ from other static refrigerators in their operating principle. In normal refrigerators the humidity entering the refrigerators due to opening the door and the humidity inherent in the food causes freezing in the backside of air duct. To defrost the frost and ice in the backside of air duct, you are periodically required to turn off the refrigerator, place the food that needs to be kept cooled in a separately cooled. Dry and cold air is blown into the refrigerator compartment homogeneously and evenly from several points via a blower fan. Cold air dispersed homogeneously and evenly between the shelves cools all of your food equally and uniformly, thus preventing humidity and freezing. Therefore your no-frost refrigerators allows you ease of use, in addition to its huge capacity and stylish appearance. In case of a problem within the fridge, the alarm led will release red light. For optimal appliance performance in maximum cooling capacity, set the appliance to active super cooling mode 6 hours before you put the fresh food into the fridge. During this mode: If you press temperature set button, the mode will be cancelled and the setting will be restored from 2. The super cooling mode will be cancel automatically after 6 hours or when cooling sensor temperature falls below 2 °C. Every time you press the button, the setting temperature will increase. If you press fridge setting button until super cooling symbol is displayed on your fridge. Settings display and you do not press any button within the following 3 seconds. It is not recommended that you operate your fridge in environments colder than 10°C in terms of its efficiency. Temperature adjustments should be made according to the frequency of door openings And the quantity of food kept inside the fridge. In order to help you better set your refrigerator, we have equipped it with a temperature indicator located in the coldest area. To better store the food in your refrigerator, especially in the coldest area, make sure the message "OK" appears on the temperature indicator. [. . . ] There is/are some part(s) out of order or there is a failure in the cooling process. The product is plugged for the first time or a long-time power interruption for 1 hour. Check the door is open or not and check if the product working 1 hour. If the door is not open and the product had worked 1 hour, call service for assistance as soon as possible. [. . . ]