User manual ZANUSSI ZSF4126

[. . . ] DISHWASHER ZSF 4126 152956 87/0 Instruction Book UK Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Prior to using for the first time The water softener Filling with dishwasher salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different kinds of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and Spare Parts Customer Care Department Guarantee Conditions 3 3 3 4 5 6 6 7 7 8 8 8 8 9 9 10 10 12 13 14 14 14 14 14 15 17 17 18 Installation instructions Fitting under a counter Levelling Water supply connections Water outlet hose connection Electrical connection Hints for test centres 19 19 19 19 20 20 21 Technical specifications Dimensions Width Height with worktop Height without worktop Max depth Max depth with open door 45 cm 85 cm 82 cm 63 cm 118. 5 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door. Minimum Maximum 50 kPa (0. 5 bar) 800 kPa (8 bar) 9 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. If you are unsure about any aspect of the information in this book, please contact our customer care department on 08705 950 950 Installation q q Check your dishwasher for any transport damage. [. . . ] This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been extended. (3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. 12 Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Setting and starting the programme Turn the programme selector dial until the marker on the dial corresponds with the desired programme (see "Washing programmes" chart). The indicator lights of the phases foreseen for the programme start flashing. Press the Start/Cancel button, the programme starts automatically and the Start/Cancel indicator light illuminates. NOTE: during the running of the programme, it is not possible to change the selection made by positioning the programme selector dial in correspondence of another programme. If you want to change the running washing programme you must cancel the selection made (see "To cancel a washing programme in progress"). NOTE: the washing programme will begin only after having pressed the Start/Cancel button. The illumination of the End indicator light indicates that the programme has ended. Switch off the dishwasher by returning the programme selector dial to the Off position. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. 7. The dishes should therefore be allowed to cool down before removing from the appliance. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 5. To interrupt or cancel a washing programme in progress Interrupt or cancel a washing programme in progress ONLY if it's absolutely necessary. Open the door carefully. To interrupt a washing programme in progress Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. To cancel a washing programme in progress Press the Start/Cancel button for about 5 seconds. The Start/Cancel indicator light turns off and the phase indicator lights are flashing. The running programme has been cancelled and it is now possible to set a new washing programme. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. 13 Maintenance and cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. [. . . ] The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Electrical connection This appliance must be earthed. [. . . ]