User manual ZIBRO A 20

[. . . ] You have acquired a high quality product that will give you years of pleasure if you use it sensibly. Read this manual first in order to optimise the life span of your air purifier. On a table or cupboard) in order to allow it to filter small particles such as smoke. [. . . ] Attach the front panel by pushing the three hooks on the top into the recesses in the device. The HEPA filter must be inserted correctly in order to guarantee that it will function correctly. The A20 air purifier is equipped with a 3 layer filter package to clean the circulated room air. The HEPA filter and activated carbon filter continue to work for a long period of time after opening. The frequency of use and operating conditions determine how often a filter must be replaced. With the aid of the fastening mechanism on both sides Next to the filter you will see a sticker printed with a small grey and brown square. If the filter is one of these colours, replace it in the matter described in chapter B. Install the new HEPA / active carbon filter (see chapter B) and close the front panel. The dirty filter can be disposed with the household waste (not biologically degradable waste) without any problem. - Regardless of the frequency of use, we recommend replacing the HEPA filter with a new filter at least once per season. The appropriate light ­ LO (low) or HI (high) ­ will then switch on. Switch the device off by moving the ON/OFF switch to the OFF position. Switch the air purifier off and remove the plug from the socket before cleaning. If the machine will not be used for a long period of time, take the following steps: The device does not work The plug has been inserted into the socket incorrectly. [. . . ] To prevent unnecessary expenses, we recommend that you always carefully read the user's manual first. If this does not provide a solution, take the air purifier to your dealer for repair. Waste electrical products should not be disposed with household waste. [. . . ]