Detailed instructions for use are in the User's Guide.
[. . . ] Operation Manual
© ZOOM Corporation Reproduction of this manual, in whole or in part, by any means, is prohibited.
SAFETY PRECAUTIONS Usage Precautions
SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and cautions for you to read so that accidents can be prevented. The meanings of these symbols are as follows:
This symbol indicates explanations about extremely dangerous matters. If users ignore this symbol and Warning handle the device the wrong way, serious injury or death could result. If users ignore this symbol and handle the device the wrong way, bodily injury and damage to the equipment could result.
Caution Warning
Contents
SAFETY PRECAUTIONS Usage Precautions . . . . . . . . . . . . . . . . . . . . . . . [. . . ] CHORUS This effect mixes a variable pitch-shifted component to the original signal, resulting in full-bodied resonating sound.
Adjusts the level of the effect sound mixed to the original sound.
STEP ST St Special effect that changes the sound in a staircase pattern. DEPTH
0 98, 1. 0
CH
CH
RATE
0 50
RESONANCE 0 10
Adjusts the modulation resonance intensity.
Adjusts the modulation depth.
DEPTH
0 98, 1. 0
RATE
1 50
MIX
TAP Adjusts the modulation rate.
0 98, 1. 0
Adjusts the modulation depth.
Adjusts the modulation rate.
Adjusts the level of the effect sound mixed to the original sound.
DL dL DELAY This is a delay with a maximum setting of 2000 ms.
TIME
1 99, 1. 0 2. 0 Adjusts the delay time. In the range from 10 990 ms, the adjustment is made in 10-ms steps (1 99). For 1 second and above, the adjustment is made in 100-ms steps (1. 0 2. 0).
STEREO CHORUS SC SC This is a stereo chorus with clear sound. DEPTH
0 98, 1. 0
FEEDBACK
0 98, 1. 0
MIX
0 98, 1. 0
TAP
RATE
1 50
MIX
0 98, 1. 0
Adjusts the modulation depth.
Adjusts the modulation rate.
Adjusts the level of the effect sound mixed to the original sound.
Adjusts the feedback amount.
Adjusts the level of the effect sound mixed to the original sound.
26
ZOOM G2
ZOOM G2
27
Effect Types and Parameters
TAPE ECHO TE tE This effect simulates a tape echo.
1 99, 1. 0 2. 0 TAP Adjusts the delay time. In the range from 10 990 ms, the adjustment is made in 10-ms steps (1 99). For 1 second and above, the adjustment is made in 100-ms steps (1. 0 2. 0).
Effect Types and Parameters
DELAY
DELAY module
FEEDBACK
0 98, 1. 0
TIME
MIX
0 98, 1. 0
DL PD EC
dL
This is a delay module which allows long delay times and use of the hold function. DELAY
Adjusts the feedback amount.
Adjusts the level of the effect sound mixed to the original sound.
HOLD This is a delay with a maximum setting of 5000 ms. Pd PINGPONG DELAY HOLD This is a ping-pong type delay where the delay sound alternates between left and right. EC ECHO
DYNAMIC DELAY DD dd This is a dynamic delay where the effect volume changes depending on the input signal level. With positive settings, the effect volume increases at higher input signal levels. With negative settings, the effect volume increases at lower input signal levels.
1 99, 1. 0 2. 0 TAP Adjusts the delay time. In the range from 10 990 ms, the adjustment is made in 10-ms steps (1 99). For 1 second and above, the adjustment is made in 100-ms steps (1. 0 2. 0).
HOLD This is a warm sounding long delay of up to 5000 ms duration. These three effect types have the same parameters.
1 99, 1. 0 5. 0 TAP Adjusts the delay time. In the range from 10 990 ms, the adjustment is made in 10-ms steps (1 99). For 1 second and above, the adjustment is made in 100-ms steps (1. 0 5. 0).
TIME
FEEDBACK
0 98, 1. 0
MIX
0 98, 1. 0
TIME
AMOUNT
0 10
SENSE
-10 -1, 1 10
Adjusts the feedback amount.
Adjusts the level of the effect sound mixed to the original sound
Adjusts the effect sensitivity.
Adjusts the level of the effect sound mixed to the original sound.
DYNAMIC FLANGER This is a dynamic flanger where the effect volume changes depending on the input signal level. With positive settings, the effect volume increases at higher input signal levels. With negative settings, the effect volume increases at lower input signal levels. DEPTH
0 98, 1. 0
DF
dF
REVERB
REVERB module
This module comprises various reverb functions such as hall reverb, early reflection, and multi-tap delay. SPRING SP SP This effect simulates a spring-type reverb.
The above three effect types have the same parameters.
RATE
0 50
SENSE
-10 -1, 1 10
Adjusts the modulation depth.
TAP Adjusts the modulation rate.
Adjusts the effect sensitivity.
MONO PITCH SHIFTER MP MP This is a monophonic pitch shifter with low sound modulation, suitable for single-note playing.
-12 -1, dt, 1 12, 24 Adjusts the pitch shift amount in semitones. Selecting "dt" gives a detuning effect.
SHIFT
TONE
0 10
MIX
0 98, 1. 0
Adjusts the sound quality.
Adjusts the level of the effect sound mixed to the original sound.
DECAY
1 30
TONE
0 10
MIX
0 98, 1. 0
Adjusts the duration of the reverb.
Adjusts the sound quality.
HARMONIZED PITCH SHIFTER This is an intelligent pitch shifter that automatically generates harmonies according to a preset key and scale.
-6, -5, -4, -3, KEY C, Co, d. . . b -m, m, 3, 4, 5, 6 Determines the interval for the pitch Determines the tonic for the scale used shifted sound (see Table 2). [. . . ] After the JMI had sold the VOX brand, the sales of the amplifier regrettably began to decline. acquired the VOX name recently and rejuvenated the brand by starting to manufacture truthful reissue models. In this G series, the program is modeled after the sound using the Hi input of the normal channel that will give you that clean guitar sound of the Beatles and the Shadows, which are the best examples of the distortion-free sound of the class-A operated amplifiers.
"JCM2000" is based on the reputed "Plexi" amp (aka Old Marshall) whose rich overtones and powerful sound were legendary. It has very flexible sound and can produce the traditional Marshall sound, modern heavy metal sound or sounds suitable for any musical genre. [. . . ]