User manual ZOOM RFX-1100
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZOOM RFX-1100. We hope that this ZOOM RFX-1100 user guide will be useful to you.
You may also download the following manuals related to this product:
ZOOM RFX-1100 (2380 ko)
ZOOM RFX-1100 (2390 ko)
ZOOM RFX-1100 (2381 ko)
ZOOM RFX-1100 (2002 ko)
ZOOM RFX-1100 (1854 ko)
ZOOM RFX-1100 AUDIO INTERFACE MANUAL (1854 ko)
Manual abstract: user guide ZOOM RFX-1100
Detailed instructions for use are in the User's Guide.
[. . . ] OPERATION MANUAL Introduction
Thank you for selecting the ZOOM RFX-1100 (hereafter simply called the "RFX1100"). The RFX-1100 is a sophisticated digital reverb and multi-effect processor with the following features and functions.
· 33 immediately usable effects The RFX-1100 comes with a full complement of preset effects (11 effects x 3 banks). The REVERB bank in particular provides a wide spread and natural sounding ambience that meets even demanding professional standards. · Built-in professional quality reverb The reverb effects alone allow 121 different settings. [. . . ] Reverb with a long pre-delay.
Reverb Time
Plate reverb acting on the low frequencies. Sets the reverb duration.
4.
VOCAL
Reverb effects best suited for vocals and narration.
S/R
CHARACTER
REVERB TIME Recommended setting
1 Female Rock 2 Male Ballad 3 Chorus 4 Female Folk 5 Hi Male Rock 6 Narration 7 Chanting 8 Slapback 9 Enhancer 10 LushVerb 11 EchoVerb
Reverb suitable for female rock singers. Reverb with long pre-delay.
Reverb Time
Sets the reverb duration.
RFX-1100 Effects
5.
AMBIENCE
These effects lend a natural sounding ambience to the sound source which is suitable not only for single instruments but also for stereo music sources.
S/R
CHARACTER
REVERB TIME Recommended setting
1 Rock Mix 2 Jazz Band 3 Reggae Mix 4 Keyboard 5 Hip Hop 6 Film Score 7 Electronic Mix 8 New Age 9 Strings Quartet 10 Choral Mix 11 Percussion Mix
ZOOM RFX-1100
Reverb for rock type music sources. Ambience suitable for percussion ensembles.
Reverb Time
Sets the reverb duration.
9
6.
DIMENSION
These effects control the spatial expansiveness of the sound.
S/R
CHARACTER
REVERB TIME Recommended setting
1 Super Wide 2 Stereo Mono 3 Left Right 4 Right Left 5 Big Delay 6 Mono Stereo 7 StereoMids 8 Huge Bass 9 Ping-Pong 10 Bass/Treble 11 Millennium
Emphasizes the stereo spread of music sources. Creates a vast reverb space.
Reverb Time
Sets the reverb duration.
7.
PERCUSSION
These reverb effects are most suitable for drums and percussion.
S/R
CHARACTER
REVERB TIME
Recommended setting
1 Rock Kit/1 2 LatinPerc 3 Jazz Drums 4 Tom 5 Shaker 6 Reggae Drums 7 Rock Kit/2 8 MalletPerc 9 Slap 10 Afro Drums 11 Bells
RFX-1100 Effects
Reverb suitable for rock drum. Creates optimum ambience for shakers and similar percussion instruments. Allows adding reverb to snares or cymbals without affecting the low range. High range effect suitable for bells.
Reverb Time
Sets the reverb duration.
8.
ENSEMBLE
These effects are best for ensemble sections such as strings or brass.
S/R
CHARACTER
REVERB TIME Recommended setting
1 Strings 2 Brass 3 Piano 4 Winds 5 Synth/1 6 Solo Strings 7 Jazz Organ
Reverb suitable for strings. Light reverb for highlighting organ sound.
Reverb Time
Sets the reverb duration.
10
ZOOM RFX-1100
8 Chorus 9 Solo Winds 10 Church Organ 11 Synth/2
Wide reverb for chorus groups. Great reverb sound for synthesizer.
Reverb Time
Sets the reverb duration.
9.
POWER
These effects add a feeling of power and energy to sound sources.
S/R
CHARACTER
REVERB TIME Recommended setting
1 Kick/1 2 Kick/2 3 Snare/1 4 Snare/2 5 Toms/1 6 Toms/2 7 Hand Perc 8 DistGtr/1 9 DistGtr/2 10 Vocal/1 11 Vocal/2
Stresses the body impact of bass drums. Suitable for ballad type vocals.
Reverb Time
Sets the reverb duration.
10.
GATE
Special effect where the reverb is briskly cut by a gate.
S/R
CHARACTER
Threshold
Adjusts the threshold level where the gate becomes active.
REVERB TIME
Reverb Time
Sets the reverb duration.
RFX-1100 Effects
11.
REVERSE
This achieves a similar effect as a tape run in reverse.
S/R
CHARACTER
Threshold
Adjusts the sensitivity of the effect, that is the level from which the reverb is applied.
REVERB TIME
Reverb Time
Sets the reverb duration.
· EFFECTS Bank
This bank contains seven sophisticated single effects (1 - 7) as well as four combined effects (8 - 11) which use two effects simultaneously. The combined effects marked with a "+" are made up of two effects connected in series. The combined effects marked with a "/" use two effects in parallel in the left and right channel.
1.
COMP LIM
(Compressor · Limiter)
This effect serves for keeping signal levels within a certain range. The compressor raises the level of signals below a certain threshold and reduces the level of strong signals. The limiter only reduces the level of strong signals.
VARIATION
Comp Lim Release
Switches between compressor and limiter and adjusts the release time. 7 - 11: Limiter Higher values mean longer release time.
REVERB TIME/ADJUST
Threshold
Sets the level where the compressor/limiter becomes active.
1 - 6: Compressor Higher values mean longer release time.
ZOOM RFX-1100
11
2.
DELAY
A delay effect with a maximum delay time of up to 1486 ms.
S/R
VARIATION
Feedback
Adjusts the amount of feedback (number of delay sound repetitions). 6: Feedback = 0 Normal feedback
REVERB TIME/ADJUST
Delay Time
Sets the delay duration.
Cross-feedback
Short delay
Long delay
3.
PITCH
Stereo pitch shifter which adds a pitch-shifted component to the original sound.
S/R
VARIATION
Pitch Shift Interval
VARIATION value 1 Shift (cent) 7 2 20
REVERB TIME/ADJUST
Pitch Shift Up/Down
Determines the direction of pitch shift.
Sets the amount of pitch shift. The range extends from slight detune to 1 octave up or down.
3 100 4 200 5 300 6 400 7 500 8 700 9 10 900 1100 11 1200
Downward shift
Upward shift
100 cent = 1 semitone
4.
CHORUS
A stereo chorus with three voices per channel.
S/R
VARIATION
Chorus Depth
Adjusts the depth of pitch modulation. Heavy modulation
REVERB TIME/ADJUST
Chorus Rate
Adjusts the pitch modulation rate. Slow
VARIATION = 4
Light modulation
Fast
ADJUST
[Setting example]
High-grade chorus with smooth presence
5.
RFX-1100 Effects
FLANGER
Stereo flanger with a wide range.
S/R
VARIATION
Flanger Depth
Specifies the range over which the effect is active. Broad range
REVERB TIME/ADJUST
Flanger Rate
Adjusts the flanger modulation rate. Fast
ADJUST
Narrow range
Slow
VARIATION = 10
[Setting example] Ultra-slow flanger great for hi-hat
6.
PHASER
Phaser with pronounced fluctuation.
S/R
VARIATION
Phaser Depth
Adjusts the intensity of the fluctuation. [. . . ] · Is incorrect foot switch connected?
No effect sound
Specifications
Preset programs Sampling frequency A/D converter D/A converter Inputs Line input 363 (11 effects x 3 banks x 11 variations) 44. 1 kHz 18 bit, 64 times oversampling 18 bit, 8 times oversampling Outputs (Unbalanced operation) Input impedance 50 kilohms Reference input level -56 dBm 2 x standard mono phone jack Output impedance 500 ohms Reference output level -10 to +4 dBm FS01 482 (W) x 115 (D) x 44 (H) mm 1. 8 kg Power cord
Control input 2 x standard mono phone jack Input impedance 10 kiloohms (mono), 20 kiloohms (stereo) Reference input level -10 to +4 dBm XLR-3-31/standard phone combo jack (Balanced operation) Input impedance 4. 5 kilohm, pin 2 hot Dimensions Weight Supplied accessory
Microphone input
* 0 dBm = 0. 775 Vrms * Design and specifications are subject to change without notice.
ZOOM RFX-1100
15
Safety Precautions/Usage Precautions
Safety Precautions
In this manual, symbols are used to highlight warnings and cautions for you to read so that accidents can be prevented. The meanings of these symbols are as follows:
Connecting cables and input and output jacks
Caution
You should always turn off the power to the RFX-1100 and all other equipment before connecting or disconnecting any cables. Also make sure to disconnect all connection cables and the power cord before moving the RFX-1100.
This symbol indicates explanations about extremely dangerous matters. If users ignore this Warning symbol and handle the device the wrong way, serious injury or death could result. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZOOM RFX-1100
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZOOM RFX-1100 will begin.